StoneTaskin Genuine For HP ProBook 450 G6 Laptop LCD Front Trim Bezel L45114-001 B-Cover 45 Days Warranty

StoneTaskin Genuine For HP ProBook 450 G6 Laptop LCD Front Trim Bezel L45114-001 B-Cover 45 Days Warranty

Product Description

This is a replacement LCD Front Trim Bezel (B-Cover) for the HP ProBook 450 G6 laptop. The part carries the original HP part number L45114-001 and is sold by the third-party supplier StoneTaskin. It is a key component of the display assembly, used to secure and protect the LCD panel, forming the front bezel of the laptop screen. The product comes with a 45-day warranty.

Core Specifications

Detailed Information & Compatibility

1. What is This Part?

The LCD Front Bezel (B-Cover) is the plastic frame that surrounds the LCD screen. It is typically attached to the screen back cover (A-Cover) and the LCD panel via clips and a few screws. Replacement is often necessary due to:

• Physical Damage: Cracked, broken, or deeply scratched bezel.

• Broken Clips: Causing the bezel to be loose or not secure.

• Cosmetic Restoration: Fixing worn, faded, or deformed bezels.

2. Critical Compatibility Check

This part is specifically designed for the HP ProBook 450 G6 (15.6-inch). It may also be compatible with the HP ProBook 455 G6 of the same generation.

To ensure compatibility, you MUST verify your laptop's exact model:

1. Turn the laptop over and find the Product Number or Model on the bottom label.

2. The HP ProBook 450 G6 product number typically starts with something like 6JZ05US.

3. You can also check the part number printed on the inside of your existing bezel to see if it matches L45114-001.

3. What's (Likely) Included

• 1 x LCD Front Bezel (B-Cover) main frame.

• May have pre-cut openings and mounting points for the webcam/microphone module.

• Note: This part usually does NOT include the LCD panel, screen back cover (A-Cover), hinges, or the webcam module itself. These need to be transferred from the old bezel.

Installation Guide (Medium Difficulty)

⚠️ Note: Replacing the LCD front bezel requires disassembling the display assembly, which involves disconnecting the LCD cable. Handle with care. Recommended for users with some teardown experience.

General Steps Overview:

1. Power Down: Shut down the laptop, unplug the AC adapter, and remove the internal battery (if removable).

2. Remove Display Assembly: Following HP's official service guide for the ProBook 450 G6, you typically need to remove the bottom cover (D-cover), disconnect the battery, then unscrew the display hinges to detach the entire display assembly from the main body.

3. Separate Old Bezel: Place the display assembly face down on a soft surface. Use a plastic spudger to carefully pry open the clips around the edges of the old bezel to separate it from the screen back cover (A-cover) and the LCD panel. Watch for any hidden screws.

4. Disconnect Cables: Carefully disconnect the webcam cable (if equipped) attached to the old bezel.

5. Install New Bezel: Route the webcam cable through the opening on the new bezel and reconnect it. Align the new bezel with the LCD panel and screen back cover, then starting from one side, press evenly to snap all the clips into place.

6. Reassemble: Reattach the display assembly to the main body, secure the hinge screws, then reinstall the bottom cover and battery.

7. Testing: Power on to test the display, webcam (if equipped), and ensure the bezel is securely fastened.

Required Tools: Precision screwdriver set (typically includes Phillips PH0, PH00), plastic spudger/pry tools, anti-static wrist strap.

Warranty & Support

• Warranty: 45 days from StoneTaskin. Typically covers manufacturing defects or DOA (Dead On Arrival) issues upon receipt.

• Limitations: Damage caused during installation, compatibility issues due to incorrect model matching, or normal wear and tear are not covered.

• No HP Support: This is a third-party part. HP's original warranty does not cover it, and HP will not provide technical support for its installation.

Package Contents

• 1 x LCD Front Bezel (B-Cover), Part Number L45114-001.

Purchase & Pre-Installation Checklist

1. Verify Model: Confirm your laptop is an HP ProBook 450 G6 (15.6-inch). Checking the product number is key.

2. Assess Damage: Ensure the issue is with the bezel itself, not the LCD panel or screen back cover.

3. Skill Check: If you are not familiar with laptop disassembly, especially the display, consider seeking professional repair service.

4. Prepare Workspace & Tools: Ensure you have the right tools and a clean, static-free workspace.

5. Data Backup: Always back up important data before attempting any hardware repair.

Summary

The StoneTaskin L45114-001 is a direct replacement LCD front bezel (B-Cover) for the HP ProBook 450 G6 laptop. It is a cost-effective solution for repairing a cracked or worn screen bezel. Compatibility is strictly for the specified 450 G6 (and potentially 455 G6) models. Installation requires careful handling and is suitable for experienced users. The 45-day warranty provides basic quality assurance.