

============================================================
CPU COOLING FAN FOR HP
Spare P/N: Q16635-001 | Module P/N: DFSCK22D058837
100% Tested | Brand New | 45-Day Warranty
============================================================
PRODUCT OVERVIEW
------------------------------------------------------------
Brand-new CPU cooling fan built to HP spare part number
Q16635-001, with module number DFSCK22D058837 (FCN-series
blower fan).
This is a replacement internal cooling fan for HP laptops that
use this exact fan assembly. It is a direct drop-in unit:
mounting holes, shroud profile and connector location are
matched to the original part, so no modification is required.
Every unit is spin-tested and connector-checked before
packing. Supplied in an anti-static bag.
IMPORTANT: HP uses several different fan assemblies across
laptops that share the same model name. Please match your
ORIGINAL FAN STICKER PART NUMBER - not the laptop model name -
before ordering.
KEY SPECIFICATIONS
------------------------------------------------------------
Product Type .............. CPU Cooling Fan (internal)
HP Spare Part Number ...... Q16635-001
Module / Mfr Part Number .. DFSCK22D058837
Fan Type .................. Blower / centrifugal
Connector ................. 4-pin, 4-wire PWM (RPM feedback)
Mounting .................. Direct replacement, original screws
Condition ................. New, 100% tested
Warranty .................. 45 days, seller warranty
Country of Manufacture .... China
NOTE ON ELECTRICAL RATING:
Voltage and current are printed on the fan label. Sibling fans
in the DFSCK22D05883x series are typically rated DC 12V / 1A,
but please verify the rating printed on your ORIGINAL fan
label and on the product label before installation.
COMPATIBILITY - PLEASE READ BEFORE ORDERING
------------------------------------------------------------
This fan matches HP spare part Q16635-001 /
DFSCK22D058837 and close sibling part numbers in the
DFSCK22D05883x series.
Compatibility is determined by PART NUMBER, not by laptop
model name. Two laptops sold under the same model name may
use completely different fan assemblies, depending on CPU,
GPU, region and production batch.
HOW TO CONFIRM YOUR PART NUMBER
------------------------------------------------------------
Option 1 - Check your original fan:
1. Remove the bottom cover of your laptop.
2. Read the sticker on the existing fan.
3. If it reads Q16635-001, or DFSCK22D05883x, this is the
correct fan family.
Option 2 - Check with HP:
1. Find the Service Tag / Serial Number on the bottom of
your laptop.
2. Look it up on the HP parts site (partsurfer.hp.com or
the HP Parts Store).
3. Search for "fan" and compare the listed spare part
number with Q16635-001.
Option 3 - Ask us:
Send us a clear photo of your old fan label before ordering
and we will confirm the match for you.
WHAT WILL NOT FIT
------------------------------------------------------------
- Laptops whose original fan carries a different part number.
- Gaming / discrete-GPU models that use a combined CPU + GPU
dual-fan cooling assembly. This listing is a single CPU fan.
- Models where the heatsink and fan are supplied as one
inseparable module, unless your original is also a bare fan.
WHAT IS INCLUDED
------------------------------------------------------------
- 1 x CPU Cooling Fan (Q16635-001 / DFSCK22D058837)
- 1 x Anti-static protective bag
NOT INCLUDED
------------------------------------------------------------
- Mounting screws (reuse the screws from your original fan)
- Thermal paste or thermal pads
- Heatsink or heat pipe (unless your model uses a bare fan)
- Installation tools
- Any other laptop internal components
INSTALLATION GUIDE
------------------------------------------------------------
Difficulty: Medium-Low (standard laptop bottom-cover service)
REMOVAL
1. Power off the laptop completely and unplug the AC adapter.
2. Remove the bottom cover.
3. Disconnect the battery connector from the motherboard
FIRST. The fan header can remain live even with the laptop
powered off.
4. Disconnect the fan connector from the motherboard. Release
the latch before pulling - do not pull by the wires.
5. Remove the 2-3 screws securing the fan.
6. Lift the fan out carefully. Do not bend the fan blades or
the surrounding housing.
INSTALLATION
1. Clean any old thermal paste from the CPU die with
isopropyl alcohol and a lint-free cloth, if your model
requires the fan to be reseated over the CPU.
2. Apply a small amount of fresh thermal paste if required.
3. Seat the new fan and align all screw holes before
tightening anything.
4. Tighten the screws evenly and only until snug. The plastic
housing cracks easily if over-tightened.
5. Reconnect the fan connector. Match the latch orientation
to your original - the connector is keyed.
6. Reconnect the battery, refit the bottom cover and power on.
7. Confirm the fan spins up. Check fan speed and CPU
temperature in BIOS or a monitoring utility.
COMMON MISTAKES TO AVOID
------------------------------------------------------------
- Ordering by laptop model name instead of fan part number.
This is the most common cause of a fan that does not fit.
- Forcing the 4-pin connector in the wrong orientation.
The connector is keyed, but a forced fit can damage the
fan control circuit.
- Skipping the battery disconnect. The fan header may be live
and a short can damage the motherboard.
- Reusing old, dried thermal paste. This defeats the purpose
of the replacement and causes overheating.
- Over-tightening the mounting screws. The plastic housing
will crack.
- Assuming laptop fan pinouts match standard desktop PC fans.
They often do not. Do not test with a desktop fan adapter.
BEFORE YOU BUY - CHECKLIST
------------------------------------------------------------
[ ] I have read the part number on my ORIGINAL fan sticker.
[ ] It matches Q16635-001 or DFSCK22D058837 / DFSCK22D05883x.
[ ] My laptop uses a single CPU fan, not a CPU + GPU dual-fan
assembly.
[ ] The screw hole positions and connector location in the
listing photos match my original fan.
[ ] I have thermal paste and a small Phillips screwdriver
ready if my model requires them.
[ ] My fault is fan-related: grinding, rattling, no spin,
fan error on boot, or overheating with the fan running.
IF YOUR SYMPTOM IS DIFFERENT
------------------------------------------------------------
- No display / no POST ............ likely motherboard or RAM,
not the cooling fan.
- Random shutdowns with a fan that
spins normally .................. check thermal paste and
heatsink contact first.
- Fan always at full speed ........ check the connector
seating and the original
fan pinout.
- Battery not charging ............ power board or battery,
not the cooling fan.
WARRANTY AND SUPPORT
------------------------------------------------------------
45-day seller warranty covering dead on arrival, failure to
spin, and abnormal bearing noise under normal use.
This is a seller warranty, not an HP factory warranty.
To make a claim, please provide:
- Your order number
- A photo of the fan label on the received unit
- A short description or video of the fault
Warranty does not cover damage caused by incorrect
installation, forced connectors, over-tightening, liquid
damage, or use in a model that does not match the listed
part number.
PACKAGING AND SHIPPING
------------------------------------------------------------
Each fan is individually packed in an anti-static bag and
protected with bubble wrap for transit. Orders are dispatched
within the stated handling time. Please inspect the fan for
transit damage before installation and contact us
immediately if anything is wrong.
QUESTIONS?
------------------------------------------------------------
Not sure whether this fan fits your laptop? Send us a photo
of your original fan label and your laptop model, and we will
confirm before you order.
============================================================
Part Number Reference: Q16635-001 / DFSCK22D058837
============================================================










