PCparts P29018-001 New Cooling Fan For HP OmniBook 16-AS 16-AR Laptop CPU Cooling Fan 100% Tested 45 Days Warranty

color: FAN

FAN
Add to Wishlist

Guaranteed Safe Checkout

paypalvisamasteramerican expressdiscoverapple pay
Fast standard shipping on all orders. Estimated shipping is 7-15 days.
Description






aeProduct.getSubject()

============================================================

CPU COOLING FAN FOR HP OMNIBOOK X FLIP 16

Spare P/N: P29018-001

100% Tested  |  Brand New  |  45-Day Warranty

============================================================



PRODUCT OVERVIEW

------------------------------------------------------------

Brand-new CPU cooling fan built to HP spare part number

P29018-001. This is the active CPU fan for HP OmniBook X

Flip 16" 2-in-1 laptops in the 16-AS / 16-AR families

(TPN-166 / TPN-167 platform references).


It is a direct drop-in replacement: mounting holes, shroud

profile and connector location follow the original HP design,

so no modification is required.


Every unit is spin-tested and connector-checked before

packing. Supplied in an anti-static bag.


IMPORTANT: HP uses different fan assemblies across OmniBook

configurations. Always match your ORIGINAL FAN STICKER PART

NUMBER - not just the laptop model name - before ordering.



KEY SPECIFICATIONS

------------------------------------------------------------

Product Type .............. CPU Cooling Fan (internal, active)

HP Spare Part Number ...... P29018-001

Fan Type .................. Blower / centrifugal

Electrical Rating ......... DC 5V / 0.8A (typical for this P/N)

Connector ................. 4-pin, 4-wire (keyed laptop header)

Mounting Screws ........... 3 x Phillips M2.0 x 4.0

Platform Reference ........ TPN-166 / TPN-167

Condition ................. New, 100% tested

Warranty .................. 45 days, seller warranty

Brand ..................... PCparts (third-party new)

Country of Manufacture .... China


NOTE: Always verify the voltage/amperage printed on your

ORIGINAL fan label before installation. Do not guess.



COMPATIBILITY - PLEASE READ BEFORE ORDERING

------------------------------------------------------------

This fan is built to HP spare part P29018-001.


Title-listed compatible families:

- HP OmniBook X Flip 16-AS series (16-as0000 / 16-as1000)

- HP OmniBook X Flip 16-AR series (16-ar0000)

- TPN-166 / TPN-167 platform references


Example confirmed sub-models (for reference only):

- 16-AS0013DX / 16-AS0023DX / 16-AS0033DX / 16-AS0043DX

- 16-AS0047NR / 16-AS0053DX / 16-AS1109NR

- 16-AR0013DX / 16-AR0033DX / 16-AR0043CL / 16-AR0047NR

- 16-AR0087NR / 16z-AR000


Final compatibility = PART NUMBER + CONNECTOR, not model name.


HOW TO CONFIRM YOUR PART NUMBER

------------------------------------------------------------

Option 1 - Check your original fan:

  1. Remove the bottom cover of your laptop.

  2. Read the sticker on the existing fan.

  3. If it reads P29018-001, this is the correct fan.


Option 2 - Check with HP:

  1. Find the Product Number / Serial on the bottom label.

  2. Look it up on HP PartSurfer (partsurfer.hp.com).

  3. Search "fan" and compare the listed spare number with

     P29018-001.


Option 3 - Ask us:

  Send a clear photo of your old fan label + connector close-

  up, and we will confirm the match before you order.


WHAT WILL NOT FIT

------------------------------------------------------------

- Laptops whose original fan carries a different P/N.

- OmniBook models outside the 16-AS / 16-AR (TPN-166/167)

  platform - other OmniBook sizes use different fans.

- Fanless configurations (if any) - confirm your unit has a

  physical fan before ordering.

- Different connector pin count or shroud shape than shown.



WHAT IS INCLUDED

------------------------------------------------------------

- 1 x CPU Cooling Fan (P29018-001 spec)

- Anti-static protective bag


NOT INCLUDED

------------------------------------------------------------

- Mounting screws (reuse from original fan: M2.0 x 4.0)

- Thermal paste or thermal pads

- Heatsink / heat pipe

- Installation tools

- Any other internal components



INSTALLATION GUIDE

------------------------------------------------------------

Difficulty: Medium-Low (standard HP 16" 2-in-1 bottom service)


TOOLS

- Phillips #0 screwdriver

- Plastic spudger

- Anti-static wrist strap (recommended)


REMOVAL (based on HP service manual)

1. Shut down fully. Unplug AC and any peripherals.

2. Remove the bottom cover.

3. DISCONNECT THE BATTERY CABLE FROM THE SYSTEM BOARD FIRST.

   The fan header can stay live even when powered off.

4. Disconnect the fan cable from the system board.

5. Remove the 3 x Phillips M2.0 x 4.0 screws securing the fan.

6. Lift the fan out carefully. Do not bend the blades.


INSTALLATION

1. Clean old thermal paste from the CPU with isopropyl

   alcohol and a lint-free cloth.

2. Apply a small pea-sized dot of fresh thermal paste.

3. Seat the new fan and align all screw holes before

   tightening.

4. Reinstall the 3 screws evenly and snug - do NOT over-

   torque, the housing cracks easily.

5. Plug in the fan cable - match the latch orientation.

6. Reconnect the battery, refit the bottom cover, power on.

7. Confirm the fan spins up normally. Check CPU temperature

   under light load.



COMMON MISTAKES TO AVOID

------------------------------------------------------------

- Ordering by "OmniBook 16"" only. Match the fan sticker P/N.

- Skipping battery disconnect. Risk of shorting the fan

  control circuit.

- Pulling the fan cable by the wires. Use the connector body.

- Forcing the 4-pin connector backwards. It is keyed.

- Reusing dry thermal paste. Causes hotspots and throttling.

- Mixing screw lengths. Keep fan screws separate from

  bottom-cover screws.

- Over-tightening fan screws. The plastic shroud cracks.



BEFORE YOU BUY - CHECKLIST

------------------------------------------------------------

[ ] My laptop is OmniBook X Flip 16-AS or 16-AR (TPN-166/167).

[ ] Original fan sticker reads P29018-001.

[ ] Connector shape & pin count match the listing photos.

[ ] Screw holes line up with my original fan.

[ ] Fault is fan-related: grinding, rattling, no spin,

    loud noise, overheating with fan stalled.


IF YOUR SYMPTOM IS DIFFERENT

------------------------------------------------------------

- No display / no POST ............ likely motherboard/RAM

- Overheats but fan spins .......... check paste + heatsink

                                    contact first

- Fan always full speed ........... check connector seating

- Battery not charging ............ power/charging circuit,

                                    not the fan



WARRANTY AND SUPPORT

------------------------------------------------------------

45-day seller warranty covering DOA, no-spin, and abnormal

bearing noise under normal use.


This is a seller warranty, not an HP factory warranty.


To make a claim, provide:

- Order number

- Photo of the received fan label

- Short description or video of the fault


Warranty does not cover damage from wrong-model use, forced

connectors, over-tightening, liquid damage, or incorrect

installation.



PACKAGING AND SHIPPING

------------------------------------------------------------

Each fan is packed in an anti-static bag with bubble

protection. Inspect on arrival before installation. Contact

us immediately if anything is damaged in transit.



QUESTIONS?

------------------------------------------------------------

Not sure if this fits? Send a photo of your old fan label

(and connector close-up) plus your laptop model/serial -

we will confirm before you order.


============================================================

Part Number Reference: P29018-001

============================================================

aeProduct.getSubject()









Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)